extract

(PHP 4, PHP 5, PHP 7, PHP 8)

extract — 从数组中将变量导入到当前的符号表

说明

extract ( array &$array , int $flags = EXTR_OVERWRITE , string $prefix = "" ) : int

本函数用来将变量从数组中导入到当前的符号表中。

检查每个键名看是否可以作为一个合法的变量名，同时也检查和符号表中已有的变量名的冲突。

Warning

不要对不可信的数据使用 extract()，类似用户输入 （例如 $_GET、$_FILES）。

参数

array

一个关联数组。此函数会将键名当作变量名，值作为变量的值。 对每个键／值对都会在当前的符号表中建立变量，并受到 flags 和 prefix 参数的影响。

必须使用关联数组，数字索引的数组将不会产生结果，除非用了 EXTR_PREFIX_ALL 或者 EXTR_PREFIX_INVALID。

flags

对待非法／数字和冲突的键名的方法将根据取出标记 flags 参数决定。可以是以下值之一：

EXTR_OVERWRITE
如果有冲突，覆盖已有的变量。
EXTR_SKIP
如果有冲突，不覆盖已有的变量。
EXTR_PREFIX_SAME
如果有冲突，在变量名前加上前缀 prefix。
EXTR_PREFIX_ALL
给所有变量名加上前缀 prefix。
EXTR_PREFIX_INVALID
仅在非法／数字的变量名前加上前缀 prefix。
EXTR_IF_EXISTS
仅在当前符号表中已有同名变量时，覆盖它们的值。其它的都不处理。 举个例子，以下情况非常有用：定义一些有效变量，然后从 $_REQUEST 中仅导入这些已定义的变量。
EXTR_PREFIX_IF_EXISTS
仅在当前符号表中已有同名变量时，建立附加了前缀的变量名，其它的都不处理。
EXTR_REFS
将变量作为引用提取。这有力地表明了导入的变量仍然引用了 array 参数的值。可以单独使用这个标志或者在 flags 中用 OR 与其它任何标志结合使用。

如果没有指定 flags，则被假定为 EXTR_OVERWRITE。

prefix

注意 prefix 仅在 flags 的值是 EXTR_PREFIX_SAME，EXTR_PREFIX_ALL，EXTR_PREFIX_INVALID 或 EXTR_PREFIX_IF_EXISTS 时需要。 如果附加了前缀后的结果不是合法的变量名，将不会导入到符号表中。前缀和数组键名之间会自动加上一个下划线。

返回值

返回成功导入到符号表中的变量数目。

范例

Example #1 extract() 例子

extract() 的一种可能用法是将 wddx_deserialize() 返回的结合数组中的内容导入到符号表变量中去。

<?php

/* 假定 $var_array 是 wddx_deserialize 返回的数组*/

$size = "large";
$var_array = array("color" => "blue",
                   "size"  => "medium",
                   "shape" => "sphere");
extract($var_array, EXTR_PREFIX_SAME, "wddx");

echo "$color, $size, $shape, $wddx_size\n";

?>

以上例程会输出：

blue, large, sphere, medium

$size 没有被覆盖，因为指定了 EXTR_PREFIX_SAME，这使得 $wddx_size 被建立。如果指定了 EXTR_SKIP，则 $wddx_size 也不会被建立。EXTR_OVERWRITE 将使 $size 的值为"medium"，EXTR_PREFIX_ALL 将建立新变量 $wddx_color，$wddx_size 和 $wddx_shape。

注释

Warning

不要对不能信任的数据使用 extract()，例如用户的输入（$_GET， $_FILES...）。 如果这样做，要确保使用不会覆盖的 flags 值，例如 EXTR_SKIP，并且要留意应该按照 variables_order 在 php.ini 里 定义的顺序来提取。

参见

  • compact() - 建立一个数组，包括变量名和它们的值
  • list() - 把数组中的值赋给一组变量

User Contributed Notes

darrenforster99 at gmail dot com 22-Apr-2021 07:38
In response to Dan O'Donnell's note:

"Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure"

Not necessarily - even using the EXTR_IF_EXISTS flag could be extremely dangerous - imagine this code running...

<?php

global $sql ;

function runSql ()
{
  $result = $conn->query($sql);
  $conn-> close();
  return $result;
}

function extractGet ()
{
  $name = '' ;
  $address = '' ;
  foreach ( $_GET as $key => $value )
    $_GET[$key] = urldecode ( $value ) ;
  extract($_GET,EXTR_IF_EXISTS);
  $sql = str_replace ( '{NAME}', $name, $sql ) ;
  $sql = str_replace ( '{ADDRESS}', $address, $sql ) ;
}

function outputResult ( $res )
{
  echo '<pre>'.print_r ( $res->fetch_array(MYSQLI_NUM) ).'</pre>' ;
}

$sql = 'SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}';
extractGet () ;
$res = runSql () ;
outputResult ( $res ) ;
?>

Now can you see a massive security issue here...

seems all well and good if we had a url like

mycode.php?name=joe%20bloggs&address=20%20Any%20Street

as that would specifically find joe bloggs of 20 any street.

however what if someone typed in

mycode.php?sql=SELECT%20password%20FROM%20Customers

or even worse

mycode.php?sql=DELETE%20from%20Customers

The problem here is that even though as far as you're aware you defined both name and address as the only two empty variables within that function - you may have forgotten about global variables, and these global variables could cause major security issues

In the example above $sql is defined as "SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}" which seems all well and good, and safe, and then later on str_replace in the extractGet function replaces {NAME} and {ADDRESS} with the name and address variables from $_GET - but if GET contains an SQL variable then that would overwrite the global $sql variable before the str_replace function - and if the str_replace function finds no matches it just returns the original string - in the above two examples the SQL string would be "SELECT password FROM Customers" which in the example outputResult just prints the data retrieved from the database and so in this stage it could print all the customers passwords (hopefully encrypted!) to the screen (oops!) or in the second example the SQL string would be "DELETE from Customers" - with no WHERE clause that would delete all the data from the Customers table and of course a combination of

SELECT table_name FROM information_schema.tables

and

DROP TABLE <table_name>

could be a real disaster!

Of course, this is only a basic example, but it could be quite easy to forget about global variables and these global variables could quite easily be used with extract to cause serious security risks if GET, REQUEST or POST is sent to extract!
amolocaleb at gmail dot com 26-Jul-2018 05:14
If an object is typecasted into an array and "extracted",only the public properties will be accessible.Methods are of course omitted.
<?php
class Test{
    public $name = '';

    protected $age = 10;

    public $status = 'disabled';

    private $isTrue = false;

    public function __construct()
    {
        $this->name = 'Amolo';
        $this->status = 'active';
    }

    public function getName()
    {
        return $this->name;
    }

    public function getAge()
    {
        return $this->age;
    }

    public function getStatus()
    {
        return $this->status;
    }

}

$obj = (array) new Test();
var_dump($obj);
/* array(4) { ["name"]=> string(5) "Amolo" ["*age"]=> int(10) ["status"]=> string(6) "active" ["TestisTrue"]=> bool(false) } */
extract((array)new Test());
echo  $name; //Amolo
echo  $status; //active
echo $age;//Notice: Undefined variable: age
echo $isTrue;//Notice: Undefined variable: isTrue
phatsk+php at gmail dot com 18-Jun-2018 06:59
Using extract's return parameter can lead to unintended results, particularly with EXTR_REFS:

<?php

$my_data = [
    'count' => 15,
    'name' => 'foo',
];

$count = extract( $my_data, EXTR_REFS );

echo $my_data['count']; // 2, not 15.
mrkhoa99 at gmail dot com 29-May-2018 03:29
We can use extract () function for Template Engine:

<?php
#Template.php

class Template
{
    protected $viewVars;

    public function renderPage($tpl)
    {
        ob_start();
        extract($this->viewVars, EXTR_SKIP);
        include $tpl;
        return ob_end_flush();
    }

    public function assign($arr)
    {
        foreach ($arr as $key => $value) {
            $this->viewVars[$key] = $value;
        }
        return $this;
    }
}

$template = new Template();
$template->assign(
   [ 'pageHeader' => 'Page Header', 'content' => 'This is the content page']
);
$template->renderPage('tpl.php');

#tpl.php

<h1><?= $pageHeader; ?></h1>
<p><?= $content ;?></p>

Output:

Page Header
This is the content page
bob 18-Jan-2015 08:35
Note that extract() will only create or overwrite variables in the current scope, so
<?
function test(){
 $a=Array('b'=>1,'c'=>2);
 extract($a);
}
test();
exit("$b");
?>
will produce no output, whereas
<?
function test(){
 global $b;
 $a=Array('b'=>1,'c'=>2);
 extract($a);
}
test();
exit("$b");
?>
will output 1.
dmikam 18-Sep-2014 10:18
I have made some tests to compare the speed of next constructions:
<?php

extract($ARRAY);

// vs.

foreach($ARRAY as $key=>$value)
    $$key = $value;
?>

Surprisingly for me extract is 20%-80% slower then foreach construction. I don't really understand why, but it's so.
CertaiN 10-Jan-2014 04:38
[New Version]

Example Usage:
<?php
$_GET['A']['a'] = '  CORRECT(including some spaces)    ';
$_GET['A']['b'] = '  CORRECT(including some spaces)    ';
$_GET['A']['c'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['A']['d']['invalid_structure'] = 'INVALID';

$_GET['B']['a'] = '  CORRECT(including some spaces)    ';
$_GET['B']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['B']['c']['invalid_structure'] = 'INVALID';
$_GET['B']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['C']['a'] = '  CORRECT(including some spaces)    ';
$_GET['C']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['C']['c']['invalid_structure'] = 'INVALID';
$_GET['C']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['unneeded_item'] = 'UNNEEDED';

var_dump(filter_struct_utf8(INPUT_GET, array(
    'A' => array(
        'a' => '',
        'b' => FILTER_STRUCT_TRIM,
        'c' => '',
        'd' => '',
    ),
    'B' => FILTER_STRUCT_FORCE_ARRAY,
    'C' => FILTER_STRUCT_FORCE_ARRAY | FILTER_STRUCT_TRIM,
)));
?>

Example Result:
array(3) {
  ["A"]=>
  array(4) {
    ["a"]=>
    string(36) "  CORRECT(including some spaces)    "
    ["b"]=>
    string(30) "CORRECT(including some spaces)"
    ["c"]=>
    string(0) ""
    ["d"]=>
    string(0) ""
  }
  ["B"]=>
  array(3) {
    ["a"]=>
    string(36) "  CORRECT(including some spaces)    "
    ["b"]=>
    string(0) ""
    ["c"]=>
    string(0) ""
  }
  ["C"]=>
  array(3) {
    ["a"]=>
    string(30) "CORRECT(including some spaces)"
    ["b"]=>
    string(0) ""
    ["c"]=>
    string(0) ""
  }
}
CertaiN 10-Jan-2014 04:37
[New Version]
This function is very useful for filtering complicated array structure.
Also, Some integer bitmasks and invalid UTF-8 sequence detection are available.

Code:
<?php
/**
 * @param  integer $type    Constant like INPUT_XXX.
 * @param  array   $default Default structure of the specified super global var.
 *                          Following bitmasks are available:
 *  + FILTER_STRUCT_FORCE_ARRAY - Force 1 dimensional array.
 *  + FILTER_STRUCT_TRIM        - Trim by ASCII control chars.
 *  + FILTER_STRUCT_FULL_TRIM   - Trim by ASCII control chars,
 *                                full-width and no-break space.
 * @return array            The value of the filtered super global var.
 */
define('FILTER_STRUCT_FORCE_ARRAY', 1);
define('FILTER_STRUCT_TRIM', 2);
define('FILTER_STRUCT_FULL_TRIM', 4);
function filter_struct_utf8($type, array $default) {
    static $func = __FUNCTION__;
    static $trim = "[\\x0-\x20\x7f]";
    static $ftrim = "[\\x0-\x20\x7f\xc2\xa0\xe3\x80\x80]";
    static $recursive_static = false;
    if (!$recursive = $recursive_static) {
        $types = array(
            INPUT_GET => $_GET,
            INPUT_POST => $_POST,
            INPUT_COOKIE => $_COOKIE,
            INPUT_REQUEST => $_REQUEST,
        );
        if (!isset($types[(int)$type])) {
            throw new LogicException('unknown super global var type');
        }
        $var = $types[(int)$type];
        $recursive_static = true;
    } else {
        $var = $type;
    }
    $ret = array();
    foreach ($default as $key => $value) {
        if ($is_int = is_int($value)) {
            if (!($value | (
                FILTER_STRUCT_FORCE_ARRAY |
                FILTER_STRUCT_FULL_TRIM |
                FILTER_STRUCT_TRIM
            ))) {
                $recursive_static = false;
                throw new LogicException('unknown bitmask');
            }
            if ($value & FILTER_STRUCT_FORCE_ARRAY) {
                $tmp = array();
                if (isset($var[$key])) {
                    foreach ((array)$var[$key] as $k => $v) {
                        if (!preg_match('//u', $k)){
                            continue;
                        }
                        $value &= FILTER_STRUCT_FULL_TRIM | FILTER_STRUCT_TRIM;
                        $tmp += array($k => $value ? $value : '');
                    }
                }
                $value = $tmp;
            }
        }
        if ($isset = isset($var[$key]) and is_array($value)) {
            $ret[$key] = $func($var[$key], $value);
        } elseif (!$isset || is_array($var[$key])) {
            $ret[$key] = null;
        } elseif ($is_int && $value & FILTER_STRUCT_FULL_TRIM) {
            $ret[$key] = preg_replace("/\A{$ftrim}++|{$ftrim}++\z/u", '', $var[$key]);
        } elseif ($is_int && $value & FILTER_STRUCT_TRIM) {
            $ret[$key] = preg_replace("/\A{$trim}++|{$trim}++\z/u", '', $var[$key]);
        } else {
            $ret[$key] = preg_replace('//u', '', $var[$key]);
        }
        if ($ret[$key] === null) {
            $ret[$key] = $is_int ? '' : $value;
        }
    }
    if (!$recursive) {
        $recursive_static = false;
    }
    return $ret;
}
?>
FredLawl 13-May-2013 02:56
It is possible to use this as a way to create public attributes for a class.

<?php
class Foo {

  public function __construct ($array) {

      extract($array, EXTR_REFS);
      foreach ($array as $key => $value) {
          $this->$key = $$key;
          // Do: $this->key = $key; if $key is not a string.
      }

  }

}

$array = array(
    'valueOne'      => 'Test Value 1',
    'valueTwo'      => 'Test Value 2',
    'valueThree'    => 'Test Value 3'
);

$foo = new Foo($array);

// Works
echo $foo->valueOne; // Test Value 1
echo $foo->valueTwo; // Test Value 2

// Does not work!
echo $foo::$valueOne; // Fatal error:  Access to undeclared static property: Test::$valueOne
?>
dotslash.lu at gmail.com 29-Apr-2013 12:55
You can't extract a numeric indexed array(e.g. non-assoc array).
<?php
$a = array(
  1,
  2
);
extract($a);
var_dump(${1});
?>

result:
PHP Notice:  Undefined variable: 1 in /Users/Lutashi/t.php on line 7

Notice: Undefined variable: 1 in /Users/Lutashi/t.php on line 7
NULL
Robc 01-Nov-2011 06:30
When extracting from a row after a database query using for example:

$row = mysql_fetch_array($result, MYSQL_ASSOC)
extract($row);

I find that the resultant variables may not match the variable type in the database.  In particular I have found integers in the database may gettype() to string on the extracted variable.
Rodrigo 15-Jun-2010 09:41
Here's a way to use extract in $_FILES arrays without using register_gloabals on.

I started to use extract a few weeks ago, and my codes hasn't been so clean since then. The use of the arrays $_POST and $_GET is ok, but one missed doublequote causes a lot of trouble.

Besides I teach PHP in a school, and this function has made my examples easier.

<?php
if(isset($_FILES["file"])){
    extract($_FILES);
    extract($file);
    echo $name."<br>";
    echo $tmp_name."<br>";
    echo $size."<br>";
}
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Documento sin t&iacute;tulo</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>

<body>
<form action="" method="post" enctype="multipart/form-data" name="form1">
  <p>
    <input type="file" name="file">
</p>
  <p>
    <input type="submit" name="Submit" value="Enviar">
</p>
</form>
</body>
</html>

Hope this can help anyone.
auto493097 at hushmail dot com 23-Feb-2010 10:07
I use XDebug with NetbeansIDE to for analyzing and developing PHP Code. When debugging an extract statement no new variables appeared in the variable's list. Although all variables created by extract could be examined by explicit watch items and single variables appeared as soon as an PHP script makes use of them I am not sure weather it is a wrong configuration, a feature or a bug in XDebug.
danbettles at yahoo dot co dot uk 24-Aug-2009 04:04
When using EXTR_PREFIX_ALL - and probably all the other EXTR_PREFIX_* constants - and a numerically-indexed array, extract() will add an underscore ("_") between the prefix and the index.

<?php

extract(array('foo', 'bar'), EXTR_PREFIX_ALL, 'var');

print_r(get_defined_vars());  // Reveals $var_0 = 'foo' and $var_1 = 'bar'
?>
benjaminATwebbutvecklarnaDOTse 16-Mar-2008 07:15
In the meantime, I'm using this:

// extract alternative
# extracts variables where new value is above the threshold or if old value is on or below the threshold (or var is not defined)
# an associative array is obviously the sane thing to pass
#
# I am absolutely certain someone will find obvious problems or errors with this
# I haven't even tried to compare other values than 0 so if you need to do that and surely finds obvious flaws,
# please mail me, I'd really like to know.
# benjaminATwebbutvecklarnaDOTse

// usage example:
# thrextract(mysql_fetch_assoc(mysql_query("SELECT preset_this,preset_that FROM site_preset WHERE ID = $site_id")));
# thrextract(mysql_fetch_assoc(mysql_query("SELECT preset_this,preset_that FROM category_preset WHERE ID = $category_id")));

function thrextract($arr,$thr = 0){
    foreach($arr as $key => $var){
        global $$key;
        if($var > $thr or $$key <= $thr) $$key = $var;
    }
}
benjaminATwebbutvecklarnaDOTse 16-Mar-2008 06:19
Re: anon at anon dot org, about extract() and null values

Personally I've found use extracting multiple resultsets from db where the latter would overwrite the previous when a variable is not null ( and optionally if its not >0 )

It would be useful if $extract_type was extended on top of these two:

EXTR_OVERWRITE
EXTR_SKIP

with something like this:

EXTR_OVERWRITE_NULL
 - If there is a collision, overwrite the existing variable if it is null

EXTR_OVERWRITE_0
 - Same thing but == 0 or null

EXTR_SKIP_NULL
 - If there is a collision, skip the new variable if the existing is not null

EXTR_SKIP_0
 - Same thing but == 0 or null

Those ought to cover a few good cases that aren't covered now.
Hayley Watson 13-Mar-2008 03:18
Dan O'Donnell's suggestion needs a third requirement to work as described:

c) No other variables are defined - especially variables that contain potentially sensitive information.

Without that condition the difference between extract() and assigning variables by hand (and the resulting security implications) should be obvious.

The only valid security step there is (b) - but you should be doing that anyway.
Dan O'Donnell 21-Apr-2007 12:25
Following up on ktwombley at gmail dot com's post:

Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure

a) your define acceptable input variables beforehand (i.e. as empty variables)
b) Sanitise any user input to avoid unacceptable variable content.

If you do these two things, then I'm not sure I see the difference between extract($_REQUEST,EXTR_IF_EXISTS); and assigning each of the variables by hand.

I'm not talking here about the idea of storing the variables in a database, just the immediately necessary steps to allow you to use extract on REQUEST arrays with relative safety.
Dutchdavey 13-Mar-2007 12:26
I would draw your attention to the user note at the very end of this page regarding PREFIXES. The user points out that php adds a '_' to your prefixes.
ktwombley at gmail dot com 31-Aug-2006 10:05
It's really easy to open gaping security holes using extract() on $_REQUEST, $_GET, etc. You have to be really sure of what you're doing, and use the proper flags on extract() to avoid clobbering important variables.

For instance, the submission by kake26 at gmail dot com will not only perfectly emulate register globals (that's bad), but it'll store it in a database and recall the same variables every time the script runs (essentially allowing an attacker to attack your script every time it runs via one attack). Oops!

To fix it, you'd have to get creative with flags. Maybe you could use EXTR_PREFIX_ALL instead of EXTR_OVERWRITE, for example. Of course, you should also sanitize the form elements to ensure there's no php code in them, and also to make sure any very important variables aren't in the form data. (like the classic $is_admin = true attack)
nicolas zeh 16-Mar-2006 09:24
This function provides exactly the same functionality as extract except that a parameter was added defining the extract target.
This function can be used if your PHP installation does not support the required Flags or more important if you would like to extract arrays to another destination as to $GLOBALS, i.e. other arrays or objects.
The only difference to extract is that extract_to moves the array pointer of $arr to the end as $arr is passed by reference to support the EXTR_REFS flag.

<?php
    if( !defined('EXTR_PREFIX_ALL') ) define('EXTR_PREFIX_ALL', 3);
    if( !defined('EXTR_PREFIX_INVALID') ) define('EXTR_PREFIX_INVALID', 4);
    if( !defined('EXTR_IF_EXISTS') ) define('EXTR_IF_EXISTS', 5);
    if( !defined('EXTR_PREFIX_IF_EXISTS') ) define('EXTR_PREFIX_IF_EXISTS', 6);
    if( !defined('EXTR_REFS') ) define('EXTR_REFS', 256);
   
   
    function extract_to( &$arr, &$to, $type=EXTR_OVERWRITE, $prefix=false ){
       
        if( !is_array( $arr ) ) return trigger_error("extract_to(): First argument should be an array", E_USER_WARNING );
       
        if( is_array( $to ) ) $t=0;
        else if( is_object( $to ) ) $t=1;
        else return trigger_error("extract_to(): Second argument should be an array or object", E_USER_WARNING );
       
        if( $type==EXTR_PREFIX_SAME || $type==EXTR_PREFIX_ALL || $type==EXTR_PREFIX_INVALID || $type==EXTR_PREFIX_IF_EXISTS )
            if( $prefix===false ) return trigger_error("extract_to(): Prefix expected to be specified", E_USER_WARNING );
            else $prefix .= '_';
       
        $i=0;
        foreach( $arr as $key=>$val ){
           
            $nkey = $key;
            $isset = $t==1 ? isset( $to[$key] ) : isset( $to->$key );
           
            if( ( $type==EXTR_SKIP && $isset )
                || ( $type==EXTR_IF_EXISTS && !$isset ) )
                    continue;
           
            else if( ( $type==EXTR_PREFIX_SAME && $isset )
                || ( $type==EXTR_PREFIX_ALL )
                || ( $type==EXTR_PREFIX_INVALID && !preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $key ) ) )
                    $nkey = $prefix.$key;
                   
            else if( $type==EXTR_PREFIX_IF_EXISTS )
                if( $isset ) $nkey = $prefix.$key;
                else continue;

            if( !preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $nkey ) ) continue;
           
            if( $t==1 )
                if( $type & EXTR_REFS ) $to->$nkey = &$arr[$key];
                else $to->$nkey = $val;
            else
                if( $type & EXTR_REFS ) $to[$nkey] = &$arr[$key];
                else $to[$nkey] = $val;
           
            $i++;
        }
       
        return $i;
    }
   
    // e.g.:
    extract_to( $myarray, $myobject, EXTR_IF_EXISTS );
?>
owk dot ch199_ph at gadz dot org 08-Mar-2006 04:21
And if you want with PHP 5 an easy way to extract $V by reference, try this :
<?php
    foreach ($V as $k => &$v) {
        $$k =& $v;
    }
?>
It can be used to create special kind of "free args" functions that let you choose when you call them the way you send variables, and which ones. They are moreover very fast to call thanks to references :
<?php
    function free_args (&$V) {
        foreach ($V as $k => &$v) {
            $$k =& $v;
        }
        unset ($k);  unset ($v);  unset ($V);

        // be careful that if you need to extract $k, $v or $V variables you should find other names for them in the lines above (ie. $__k, $__v and $__V)
    }

    $huge_text = '...';

    $a = array ('arg1' => 'val1', 'arg2' => &$huge_text); // in this call, only $arg2 will be a true reference in the function
    free_args ($a);
?>
Be warned that you can't write : "<?php free_args (array ('arg1' => 'val1')); ?>" because the array can't be referenced by the function, as it's not yet created when the function starts.
moslehi<atsign>gmail<d0t>c0m 20-Jan-2006 01:32
Experimentally I found that calling extract() also shows the number of keys if the key is set and is not numeric ! Maybe there was a better definition than mine  . Please have a look to this scripts :

<?PHP
$var["i"] = "a";
$var["j"] = "b";
$var["k"] = 1;
echo extract($var); // returns 3
?>

<?PHP
$var2["i"] = "a";
$var2[2] = "b";
$var2[] = 1;
echo extract($var2); // returns 1
?>

(Arash Moslehi)
Csaba at alum dot mit dot edu 27-Nov-2005 11:41
Sometimes you may want to extract only a named subset of the key/value pairs in an array.  This keeps things more orderly and could prevent an unrelated variable from getting clobbered from an errant key.  For example,

$things = 'unsaid';
$REQUEST = array(He=>This, said=>1, my=>is, info=>2, had=>a,
                 very=>3, important=>test, things=>4);
$aVarToExtract = array(my, important, info);
extract (array_intersect_key ($REQUEST, array_flip($aVarToExtract)));

will extract
$my = 'is';
$important = 'test';
$info = 2;

but will leave certain
$things = 'unsaid'

Csaba Gabor from Vienna
NB.  Of course the composite request coming in from a web page is in $_REQUEST.
anon at anon dot org 30-May-2005 12:02
A warning about extract() and null values.

This might be an actual Zend2 Engine bug, but it's bad programming practice, so I'm sharing it here instead.

I often work in envrionments where E_STRICT (which would prevent errors like this) isn't on, and I don't have access to change it. I also use a very simple template class that in a nutshell works like this:

$t = new Template('somefile.php');
$t->title = $title;
$t->body = $body;
$t->display();

display() more or less looks like this:

function display(){
    extract(get_object_vars($this),EXTR_REFS);
    ob_start(); include $this->templateFileName;
    return ob_get_clean();
}

If any of the assigned values are null (let's say that in this case $title wasn't initialized above) it causes the engine to do all sorts of incredibly whacky stuff like certifiably lose track of variables in an incredibly inconsistent way. I traced the problem down to the fact that it's using the EXTR_REFS flag. I assume that in PHP's internal variable storage or reference counting mechanism, that trying to extract null references makes it lose track or count of something or rather.

In a nutshell, if you start getting wierd behavior when using extract() make sure that the array or object you are trying to get variables out of doesn't contain null keys or values!
kake26 at gmail dot com 30-Apr-2005 08:59
The following is a neat use for extract to store and manipulate large amounts of form data from. I basically loop through the $_POST and implode it seperating the key and value pairs by a space. Then store it in a db, the reversing function basically explodes the string to a array. Then converts the indexed array to a associative array then uses extract to seal the deal and make it easily available within a program. My main reason for sharing these are the fact I make some big web applications that store allot of forum data in a DB and these functions make it very easy to quickly and easily store and recall the data. I've contributed it because I spent many hours creating this code and recall going "I wish someone had previously submitted it to the page notes". Would have saved me allot of time and agony and I'm sure I'm not the only person that could really benefit from it, so I decided to share.

<?php
$stack = array();
foreach ($_POST as $key => $value) {
array_push($stack, $key, $value);
}
// store it
$block = implode(" ",$stack); // yeilds a space delimited string
// insert query to store string in DB here, like the one below
$query = "INSERT INTO `sometable` VALUES('".$seluser."','".addslashes($block)."');";
$result = mysql_query($query) or die("Query failed for block insert: " . mysql_error());
// note $seluser in my case is a user ID associated with that block
// in one of my web apps
?>

The nice thing is with the above we can quickly create a string of key and value pairs from the data the script got. Without really caring what their names are. You know how if register globals are on you say $someformvar rather than $_POST["someformvar"]; , basically the code below reads this previous created block returns it to that state. Sort of like presistant register globals.

<?php
// insert query to grab the previously stored string here
$query = "SELECT * FROM `sometable` WHERE `blockid` = '".addslashes($bid)."';";
$result = mysql_query($query) or die("Query failed read: " . mysql_error());
$sql = mysql_fetch_array($result, MYSQL_ASSOC);
$array = eplode(" ",$sql["data"]);
for ($i = 0; $i < sizeof($array); $i+=2) {
$myassoc[$array[$i]] = isset($array[$i+1])?$array[$i+1]:NULL;
}
extract($myassoc, EXTR_OVERWRITE);
// now you're key and value pairs from $_POST have been restored
// instead of $_POST
?>
pg dot perfection at gmail dot com 14-Mar-2005 02:33
Here is a little example of how an extraction method should look like when it needs to work recursive (work on nested_arrays too)...

Note that this is only an example, it can be done more easily, and more advanced too.

<?php
/**
 * A nested version of the extract () function.
 *
 * @param    array    $array        The array which to extract the variables from
 * @param    int        $type        The type to use to overwrite (follows the same as extract () on PHP 5.0.3
 * @param    string    $prefix        The prefix to be used for a variable when necessary
 */
function extract_nested (&$array, $type = EXTR_OVERWRITE, $prefix = '')
{
    /**
     *  Is the array really an array?
     */
    if (!is_array ($array))
    {
        return trigger_error ('extract_nested (): First argument should be an array', E_USER_WARNING);
    }

    /**
     *  If the prefix is set, check if the prefix matches an acceptable regex pattern
     * (the one used for variables)
     */
    if (!empty ($prefix) && !preg_match ('#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $prefix))
    {
        return trigger_error ('extract_nested (): Third argument should start with a letter or an underscore', E_USER_WARNING);
    }

    /**
     * Check if a prefix is necessary. If so and it is empty return an error.
     */
    if (($type == EXTR_PREFIX_SAME || $type == EXTR_PREFIX_ALL || $type == EXTR_PREFIX_IF_EXISTS) && empty ($prefix))
    {
        return trigger_error ('extract_nested (): Prefix expected to be specified', E_USER_WARNING);
    }

    /**
     * Make sure the prefix is oke
     */
    $prefix = $prefix . '_';

    /**
     *  Loop thru the array
     */
    foreach ($array as $key => $val)
    {
        /**
         *  If the key isn't an array extract it as we need to do
         */
        if (!is_array ($array[$key]))
        {
            switch ($type)
            {
                default:
                case EXTR_OVERWRITE:
                    $GLOBALS[$key] = $val;
                break;
                case EXTR_SKIP:
                    $GLOBALS[$key] = isset ($GLOBALS[$key]) ? $GLOBALS[$key] : $val;
                break;
                case EXTR_PREFIX_SAME:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                    else
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_PREFIX_ALL:
                    $GLOBALS[$prefix . $key] = $val;
                break;
                case EXTR_PREFIX_INVALID:
                    if (!preg_match ('#^[a-zA-Z_\x7f-\xff]$#', $key{0}))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                    else
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_IF_EXISTS:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_PREFIX_IF_EXISTS:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                break;
                case EXTR_REFS:
                    $GLOBALS[$key] =& $array[$key];
                break;
            }
        }
        /**
         *  The key is an array... use the function on that index
         */
        else
        {
            extract_nested ($array[$key], $type, $prefix);
        }
    }
}
?>
Michael Newton 02-Mar-2005 05:23
They say "If the result is not a valid variable name, it is not imported into the symbol table."

What they should say is that if _any_ of the results have invalid names, _none_ of the variables get extracted.

Under 4.3.10 on Windows 2000, I was pulling some mySQL records, but needed to convert two fields into IP addresses:
<?
extract(mysql_fetch_assoc(mysql_query('SELECT * FROM foo')));
extract(mysql_fetch_assoc(mysql_query('SELECT INET_NTOA(bar) AS bar, INET_NTOA(baz) FROM foo')));
?>

I had forgotten the second AS modifier in the SQL query.  Because it couldn't extract a variable called INET_NTOA(baz) into the symbol table, it didn't do either of them.

(BTW I don't normally stack functions up like that!  Just to make a short example!)
21-Feb-2005 07:31
To make this perfectly clear (hopefully), an underscore is always added when the string is prefixed.
extract(array("color" => "blue"),EXTR_PREFIX_ALL,'');// note: prefix is empty
is the same as
$color='_blue';
Aaron Stone 17-Nov-2004 10:44
If you are working porting an older application, and taking the advice above, extracting only _SERVER, _SESSING, _COOKIE, _POST, _GET, you have forgotten to extract _FILES. Putting _FILES last and using EXTR_SKIP doesn't work because the name of the file upload box is already set as a variable containing only the temporary name of the uploaded file from one of the earlier extracts (I haven't tested to see which one specifically, however). A workaround is to put _FILES last and use EXTR_OVERWRITE. This allows extract to replace that temp-name-only variable with the full array of file upload information.
Adam Monsen <adamm at wazamatta dot com> 02-Oct-2004 05:03
As shown in the example, if your 'prefix' is used, a single underscore is added to the name of the extracted variable. Meaning, a prefix of 'p' becomes a prefix of 'p_', so 'blarg' prefixed would be 'p_blarg'.

If you're not sure what variables you've created through extraction, you can call get_defined_vars() to see all defined variables in the current scope.
PHP8中文手册 由 站长在线 整理 版权归PHP文档组所有