(PHP 4, PHP 5, PHP 7, PHP 8)
list — 把数组中的值赋给一组变量
像 array() 一样，这不是真正的函数，而是语言结构。 list() 可以在单次操作内就为一组变量赋值。
Note:
在 PHP 7.1.0 之前的版本，list() 仅能用于数字索引的数组，并假定数字索引从 0 开始。
PHP 5 里，list() 从最右边的参数开始赋值； PHP 7 里，list() 从最左边的参数开始赋值。
如果你用单纯的变量，不用担心这一点。 但是如果你用了具有索引的数组，通常你期望得到的结果和在 list() 中写的一样是从左到右的，但在 PHP 5 里实际上不是， 它是以相反顺序赋值的。
通常而言，不建议依赖于操作的顺序，在未来可能会再次发生修改。
var一个变量。
vars更多变量。
返回指定的数组。
| 版本 | 说明 |
|---|---|
| 7.3.0 | 支持在数组解构时传引用。 |
| 7.1.0 | 现在可以指定 list() 中的键。 这就可以解构非数字键或者无顺序的数组。 |
| 7.0.0 | 赋值操作的顺序发生了变化。 |
| 7.0.0 | list() 表达式不再可以完全为空。 |
| 7.0.0 | 字符串无法再被拆包（unpack）。 |
Example #1 list() 例子
<?php
$info = array('coffee', 'brown', 'caffeine');
// 列出所有变量
list($drink, $color, $power) = $info;
echo "$drink is $color and $power makes it special.\n";
// 列出他们的其中一个
list($drink, , $power) = $info;
echo "$drink has $power.\n";
// 或者让我们跳到仅第三个
list( , , $power) = $info;
echo "I need $power!\n";
// list() 不能对字符串起作用
list($bar) = "abcde";
var_dump($bar); // NULL
?>
Example #2 list() 用法的一个例子
<table>
<tr>
<th>Employee name</th>
<th>Salary</th>
</tr>
<?php
$result = $pdo->query("SELECT id, name, salary FROM employees");
while (list($id, $name, $salary) = $result->fetch(PDO::FETCH_NUM)) {
echo " <tr>\n" .
" <td><a href=\"info.php?id=$id\">$name</a></td>\n" .
" <td>$salary</td>\n" .
" </tr>\n";
}
?>
</table>
Example #3 使用嵌套的 list()
<?php
list($a, list($b, $c)) = array(1, array(2, 3));
var_dump($a, $b, $c);
?>
int(1) int(2) int(3)
Example #4 在 list() 中使用数组索引
<?php
$info = array('coffee', 'brown', 'caffeine');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
?>
产生如下输出（注意单元顺序和 list() 语法中所写的顺序的比较）：
以上例程在 PHP 7 中的输出：
array(3) {
[0]=>
string(6) "coffee"
[1]=>
string(5) "brown"
[2]=>
string(8) "caffeine"
}
以上例程在 PHP 5 中的输出：
array(3) {
[2]=>
string(8) "caffeine"
[1]=>
string(5) "brown"
[0]=>
string(6) "coffee"
}
Example #5 list() 和索引顺序定义
list() 使用 array 索引的顺序和它何时定义无关。
<?php
$foo = array(2 => 'a', 'foo' => 'b', 0 => 'c');
$foo[1] = 'd';
list($x, $y, $z) = $foo;
var_dump($foo, $x, $y, $z);
得到以下输出（注意比较 list() 所写的元素顺序）：
array(4) {
[2]=>
string(1) "a"
["foo"]=>
string(1) "b"
[0]=>
string(1) "c"
[1]=>
string(1) "d"
}
string(1) "c"
string(1) "d"
string(1) "a"
Example #6 带键的 list()
从 PHP 7.1.0 开始，list() 可以包含显式的键，可赋值到任意表达式。 可以混合使用数字和字符串键。但是不能混合有键和无键不能混用。
<?php
$data = [
["id" => 1, "name" => 'Tom'],
["id" => 2, "name" => 'Fred'],
];
foreach ($data as ["id" => $id, "name" => $name]) {
echo "id: $id, name: $name\n";
}
echo PHP_EOL;
list(1 => $second, 3 => $fourth) = [1, 2, 3, 4];
echo "$second, $fourth\n";
以上例程会输出：
id: 1, name: Tom id: 2, name: Fred 2, 4
Don't miss simple array pattern matching since php 7
<?php
[$a] = ['hello!'];
var_dump($a); // 'hello!'
$arr = [4 => 50];
[4 => $fifty] = $arr;
var_dump($fifty); // 50
$multidimensionalArray = [['id' => 15, 'email' => 'diyor024@gmail.com']];
[['id' => $id, 'email' => $email]] = $multidimensionalArray;
var_dump($id, $email); // 15 diyor024@gmail.com
?>
list($a, $b, $c) = ["blue", "money", 32];
shortcut:
[$a, $b, $c] = ["blue", "money", 32];
['a' => $x, 'b' => $y] = ['a' => 1, 'b' => 2];
echo $x . '-' . $y; // 1-2
For PHP 7.1 on, the documentation states that integer and string keys can be mixed, but that elements with and without keys cannot. Here is an example, using data from getimagesize() with mixed keys:
<?php
$data=[
0=> 160,
1 => 120,
2 => 2,
3 => 'width="160" height="120"',
'mime' => 'image/jpeg'
];
list(0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime)=$data;
?>
Here, the numeric keys also need to be specified, as if the whole array is treated as an associative array.
As noted elsewhere, the list() operator can be written in array format:
<?php
[0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime]=$data;
?>
Easy way to get actual date and time values in variables.
list($day,$month,$year,$hour,$minute,$second) = explode('-',date('d-m-Y-G-i-s'));
echo "$day-$month-$year $hour".":".$minute.":".$second;
Setting it like <?php list($var1,$varN) = null ?> does _not_ raise an E_NOTICE (or other error) and afaics effectively equals an https://php.net/function.unset of $var1,$varN.
I note this as contrasting with the fact that PHP triggers an E_NOTICE about "Undefined offset" "if there aren't enough array elements to fill the list()", as attow documented for https://php.net/control-structures.foreach#control-structures.foreach.list and here only noted in https://php.net/function.list#122951 by Mardaneus.
For completeness, a bash(1) (v5.0 or 4.3 on macos10.13) cli test producing the same result for all my PHP-versions (installed via macports.org) follows. It's also tested with php7.3 using bash5.0 on Debian10:
bash --noprofile --norc -c 'for php in php{{53..56},{70..73}};do for literal in "array()" null;do echo -n $php ...=$literal:&&$php -n -d error_reporting=E_ALL -r "var_dump(list(\$var)=$literal);";done;done'
# Above produces the same result pairs per version from:
php53 ...=array():
Notice: Undefined offset: 0 in Command line code on line 1
array(0) {
}
# ... to:
php73 ...=null:NULL
As of PHP 7.3, lists now support array destructuring - see here: https://www.php.net/manual/en/migration73.new-features.php
Since 7.1.0, you can use an array directly without list():
<?php
[$test, $test2] = explode(",", "hello, world");
echo $test . $test2; // hello, world
?>
Unless you specify keys when using list() it expects the array being fed into it to start at 0.
So having the following code will result in a notice level warning "Undefined offset: 0" and variables not filling as expected
<?php
list($c1, $c2, $c3) = array [1 =>'a', 2 => 'b', 3 => 'c'];
var_dump($c1); // NULL
var_dump($c2); // string(1) "a"
var_dump($c3); // string(1) "b"
?>
This is something I haven't seen in documentation.
Since PHP 7.1, you can use short-hand list unpacking using square brackets, just like short-hand array declaration:
<?php
$foo = ['a', 'b', 'c'];
// short-hand array definition
[$a, $b, $c] = $foo;
echo $a; // displays "a"
// it's same like:
list($x, $y, $z) = $foo;
echo $x; // displays "a"
?>
Since PHP 7.1 the [] may now be used as an alternative to the existing list() syntax:
<?php
[$number, $message] = explode('|', '123|Hello World!');
?>
From PHP Version 7.1 you can specify keys in list(), or its new shorthand [] syntax. This enables destructuring of arrays with non-integer or non-sequential keys.
<?php
$data = [
["id" => 1, "name" => 'Tom'],
["id" => 2, "name" => 'Fred'],
];
// list() style
list("id" => $id1, "name" => $name1) = $data[0];
// [] style
["id" => $id1, "name" => $name1] = $data[0];
// list() style
foreach ($data as list("id" => $id, "name" => $name)) {
// logic here with $id and $name
}
// [] style
foreach ($data as ["id" => $id, "name" => $name]) {
// logic here with $id and $name
}
<?php
/**
* It seems you can skip listed values.
* Here's an example to show what I mean.
*
* FYI works just as well with PHP 7.1 shorthand list syntax.
* Tested against PHP 5.6.30, 7.1.5
*/
$a = [ 1, 2, 3, 4 ];
// this is quite normal use case for list
echo "Unpack all values\n";
list($v1, $v2, $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
// this is what I mean:
echo "Skip middle\n";
list($v1, , , $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip beginning\n";
list( , , $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip end\n";
list($v1, $v2, , ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Leave middle\n";
list( , $v2, $v3, ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
Since PHP 7.1, keys can be specified
exemple :
<?php
$array = ['locality' => 'Tunis', 'postal_code' => '1110'];
list('postal_code' => $zipCode, 'locality' => $locality) = $array;
print $zipCode; // will output 1110
print $locality; // will output Tunis
?>
In PHP 7.1 we can do the following:
<?php
[$a, $b, $c] = ['a', 'b', 'c'];
?>
Before, we had to do:
<?php
list($a, $b, $c) = ['a', 'b', 'c'];
?>
a simple example of use to swap two variables :
$a = 'hello';
$b = 'world';
list($a, $b) = [$b, $a];
echo $a . ' ' . $b; //display "world hello"
another example :
function getPosition($x, $y, $z)
{
// ... some operations like $x++...
return [$x, $y, $z];
}
list($x, $y, $z) = getPosition($x ,$y, $z);
list() can be used with foreach
<?php
$array = [[1, 2], [3, 4], [5, 6]];
foreach($array as list($odd, $even)){
echo "$odd is odd; $even is even", PHP_EOL;
}
?>
The output:
===
1 is odd; 2 is even
3 is odd; 4 is even
5 is odd; 6 is even
UNDOCUMENTED BEHAVIOR:
list($a,$b,$c) = null;
in fact works like:
$a = null; $b = null; $c = null;
...So correspondingly:
list($rows[]) = null;
Will increment count($rows), just as if you had executed $rows[] = null;
Watch out for this (for example) when retrieving entire tables from a database, e.g.
while (list($rows[]) = $mysqlresult->fetch_row());
This will leave an extra 'null' entry as the last element of $rows.
If you want use the undefined behaviour as you might expect it e.g. if you want:
$b = ['a','b']; list($a, $b) = $b;
to result in $a=='a' and $b=='b', then you can just cast $b to an array (even although it already is) to create a copy. e.g.
$b = ['a','b']; list($a, $b) = (array)$b;
and get the expected results.
The example showing that:
$info = array('kawa', 'br?zowa', 'kofeina');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
outputs:
array(3) {
[2]=>
string(8) "kofeina"
[1]=>
string(5) "br?zowa"
[0]=>
string(6) "kawa"
}
One thing to note here is that if you define the array earlier, e.g.:
$a = [0, 0, 0];
the indexes will be kept in the correct order:
array(3) {
[0]=>
string(4) "kawa"
[1]=>
string(8) "br?zowa"
[2]=>
string(7) "kofeina"
}
Thought that it was worth mentioning.
The list construct seems to look for a sequential list of indexes rather taking elements in sequence. What that obscure statement means is that if you unset an element, list will not simply jump to the next element and assign that to the variable but will treat the missing element as a null or empty variable:
$test = array("a","b","c","d");
unset($test[1]);
list($a,$b,$c)=$test;
print "\$a='$a' \$b='$b' \$c='$c'<BR>";
results in:
$a='a' $b='' $c='c'
not:
$a='a' $b='c' $c='d'
As noted, list() will give an error if the input array is too short. This can be avoided by array_merge()'ing in some default values. For example:
<?php
$parameter = 'name';
list( $a, $b ) = array_merge( explode( '=', $parameter ), array( true ) );
?>
However, you will have to array_merge with an array long enough to ensure there are enough elements (if $parameter is empty, the code above would still error).
An alternate approach would be to use array_pad on the array to ensure its length (if all the defaults you need to add are the same).
<?php
$parameter = 'bob-12345';
list( $name, $id, $fav_color, $age ) = array_pad( explode( '-', $parameter ), 4, '' );
var_dump($name, $id, $fav_color, $age);
/* outputs
string(3) "bob"
string(5) "12345"
string(0) ""
string(0) ""
*/
?>
The list() definition won't throw an error if your array is longer then defined list.
<?php
list($a, $b, $c) = array("a", "b", "c", "d");
var_dump($a); // a
var_dump($b); // b
var_dump($c); // c
?>
The example states the following:
<?php
// list() doesn't work with strings
list($bar) = "abcde";
var_dump($bar);
// output: NULL
?>
If the string is in a variable however, it seems using list() will treat the string as an array:
<?php
$string = "abcde";
list($foo) = $string;
var_dump($foo);
// output: string(1) "a"
?>